// Copyright 2015 Matthew Holt
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

package certmagic

import (
	"context"
	"crypto/tls"
	"encoding/json"
	"fmt"
	"log"
	"net"
	"net/http"
	"path"
	"runtime"
	"strings"
	"sync"
	"sync/atomic"
	"time"

	"github.com/libdns/libdns"
	"github.com/mholt/acmez/v3"
	"github.com/mholt/acmez/v3/acme"
	"github.com/miekg/dns"
	"go.uber.org/zap"
)

// httpSolver solves the HTTP challenge. It must be
// associated with a config and an address to use
// for solving the challenge. If multiple httpSolvers
// are initialized concurrently, the first one to
// begin will start the server, and the last one to
// finish will stop the server. This solver must be
// wrapped by a distributedSolver to work properly,
// because the only way the HTTP challenge handler
// can access the keyAuth material is by loading it
// from storage, which is done by distributedSolver.
type httpSolver struct {
	closed  int32 // accessed atomically
	handler http.Handler
	address string
}

// Present starts an HTTP server if none is already listening on s.address.
func (s *httpSolver) Present(ctx context.Context, _ acme.Challenge) error {
	solversMu.Lock()
	defer solversMu.Unlock()

	si := getSolverInfo(s.address)
	si.count++
	if si.listener != nil {
		return nil // already be served by us
	}

	// notice the unusual error handling here; we
	// only continue to start a challenge server if
	// we got a listener; in all other cases return
	ln, err := robustTryListen(s.address)
	if ln == nil {
		return err
	}

	// successfully bound socket, so save listener and start key auth HTTP server
	si.listener = ln
	go s.serve(ctx, si)

	return nil
}

// serve is an HTTP server that serves only HTTP challenge responses.
func (s *httpSolver) serve(ctx context.Context, si *solverInfo) {
	defer func() {
		if err := recover(); err != nil {
			buf := make([]byte, stackTraceBufferSize)
			buf = buf[:runtime.Stack(buf, false)]
			log.Printf("panic: http solver server: %v\n%s", err, buf)
		}
	}()
	defer close(si.done)
	httpServer := &http.Server{
		Handler:     s.handler,
		BaseContext: func(listener net.Listener) context.Context { return ctx },
	}
	httpServer.SetKeepAlivesEnabled(false)
	err := httpServer.Serve(si.listener)
	if err != nil && atomic.LoadInt32(&s.closed) != 1 {
		log.Printf("[ERROR] key auth HTTP server: %v", err)
	}
}

// CleanUp cleans up the HTTP server if it is the last one to finish.
func (s *httpSolver) CleanUp(_ context.Context, _ acme.Challenge) error {
	solversMu.Lock()
	defer solversMu.Unlock()
	si := getSolverInfo(s.address)
	si.count--
	if si.count == 0 {
		// last one out turns off the lights
		atomic.StoreInt32(&s.closed, 1)
		if si.listener != nil {
			si.listener.Close()
			<-si.done
		}
		delete(solvers, s.address)
	}
	return nil
}

// tlsALPNSolver is a type that can solve TLS-ALPN challenges.
// It must have an associated config and address on which to
// serve the challenge.
type tlsALPNSolver struct {
	config  *Config
	address string
}

// Present adds the certificate to the certificate cache and, if
// needed, starts a TLS server for answering TLS-ALPN challenges.
func (s *tlsALPNSolver) Present(ctx context.Context, chal acme.Challenge) error {
	// we pre-generate the certificate for efficiency with multi-perspective
	// validation, so it only has to be done once (at least, by this instance;
	// distributed solving does not have that luxury, oh well) - update the
	// challenge data in memory to be the generated certificate
	cert, err := acmez.TLSALPN01ChallengeCert(chal)
	if err != nil {
		return err
	}

	key := challengeKey(chal)
	activeChallengesMu.Lock()
	chalData := activeChallenges[key]
	chalData.data = cert
	activeChallenges[key] = chalData
	activeChallengesMu.Unlock()

	// the rest of this function increments the
	// challenge count for the solver at this
	// listener address, and if necessary, starts
	// a simple TLS server

	solversMu.Lock()
	defer solversMu.Unlock()

	si := getSolverInfo(s.address)
	si.count++
	if si.listener != nil {
		return nil // already be served by us
	}

	// notice the unusual error handling here; we
	// only continue to start a challenge server if
	// we got a listener; in all other cases return
	ln, err := robustTryListen(s.address)
	if ln == nil {
		return err
	}

	// we were able to bind the socket, so make it into a TLS
	// listener, store it with the solverInfo, and start the
	// challenge server

	si.listener = tls.NewListener(ln, s.config.TLSConfig())

	go func() {
		defer func() {
			if err := recover(); err != nil {
				buf := make([]byte, stackTraceBufferSize)
				buf = buf[:runtime.Stack(buf, false)]
				log.Printf("panic: tls-alpn solver server: %v\n%s", err, buf)
			}
		}()
		defer close(si.done)
		for {
			conn, err := si.listener.Accept()
			if err != nil {
				if atomic.LoadInt32(&si.closed) == 1 {
					return
				}
				log.Printf("[ERROR] TLS-ALPN challenge server: accept: %v", err)
				continue
			}
			go s.handleConn(conn)
		}
	}()

	return nil
}

// handleConn completes the TLS handshake and then closes conn.
func (*tlsALPNSolver) handleConn(conn net.Conn) {
	defer func() {
		if err := recover(); err != nil {
			buf := make([]byte, stackTraceBufferSize)
			buf = buf[:runtime.Stack(buf, false)]
			log.Printf("panic: tls-alpn solver handler: %v\n%s", err, buf)
		}
	}()
	defer conn.Close()
	tlsConn, ok := conn.(*tls.Conn)
	if !ok {
		log.Printf("[ERROR] TLS-ALPN challenge server: expected tls.Conn but got %T: %#v", conn, conn)
		return
	}
	err := tlsConn.Handshake()
	if err != nil {
		log.Printf("[ERROR] TLS-ALPN challenge server: handshake: %v", err)
		return
	}
}

// CleanUp removes the challenge certificate from the cache, and if
// it is the last one to finish, stops the TLS server.
func (s *tlsALPNSolver) CleanUp(_ context.Context, chal acme.Challenge) error {
	solversMu.Lock()
	defer solversMu.Unlock()
	si := getSolverInfo(s.address)
	si.count--
	if si.count == 0 {
		// last one out turns off the lights
		atomic.StoreInt32(&si.closed, 1)
		if si.listener != nil {
			si.listener.Close()
			<-si.done
		}
		delete(solvers, s.address)
	}
	return nil
}

// DNS01Solver is a type that makes libdns providers usable as ACME dns-01
// challenge solvers. See https://github.com/libdns/libdns
//
// Note that challenges may be solved concurrently by some clients (such as
// acmez, which CertMagic uses), meaning that multiple TXT records may be
// created in a DNS zone simultaneously, and in some cases distinct TXT records
// may have the same name. For example, solving challenges for both example.com
// and *.example.com create a TXT record named _acme_challenge.example.com,
// but with different tokens as their values. This solver distinguishes
// between different records with the same name by looking at their values.
// DNS provider APIs and implementations of the libdns interfaces must also
// support multiple same-named TXT records.
type DNS01Solver struct {
	DNSManager
}

// Present creates the DNS TXT record for the given ACME challenge.
func (s *DNS01Solver) Present(ctx context.Context, challenge acme.Challenge) error {
	dnsName := challenge.DNS01TXTRecordName()
	if s.OverrideDomain != "" {
		dnsName = s.OverrideDomain
	}
	keyAuth := challenge.DNS01KeyAuthorization()

	zrec, err := s.DNSManager.createRecord(ctx, dnsName, "TXT", keyAuth)
	if err != nil {
		return err
	}

	// remember the record and zone we got so we can clean up more efficiently
	s.saveDNSPresentMemory(dnsPresentMemory{
		dnsName: dnsName,
		zoneRec: zrec,
	})

	return nil
}

// Wait blocks until the TXT record created in Present() appears in
// authoritative lookups, i.e. until it has propagated, or until
// timeout, whichever is first.
func (s *DNS01Solver) Wait(ctx context.Context, challenge acme.Challenge) error {
	// prepare for the checks by determining what to look for
	dnsName := challenge.DNS01TXTRecordName()
	if s.OverrideDomain != "" {
		dnsName = s.OverrideDomain
	}
	keyAuth := challenge.DNS01KeyAuthorization()

	// wait for the record to propagate
	memory, err := s.getDNSPresentMemory(dnsName, "TXT", keyAuth)
	if err != nil {
		return err
	}
	return s.DNSManager.wait(ctx, memory.zoneRec)
}

// CleanUp deletes the DNS TXT record created in Present().
//
// We ignore the context because cleanup is often/likely performed after
// a context cancellation, and properly-implemented DNS providers should
// honor cancellation, which would result in cleanup being aborted.
// Cleanup must always occur.
func (s *DNS01Solver) CleanUp(ctx context.Context, challenge acme.Challenge) error {
	dnsName := challenge.DNS01TXTRecordName()
	if s.OverrideDomain != "" {
		dnsName = s.OverrideDomain
	}
	keyAuth := challenge.DNS01KeyAuthorization()

	// always forget about the record so we don't leak memory
	defer s.deleteDNSPresentMemory(dnsName, keyAuth)

	// recall the record we created and zone we looked up
	memory, err := s.getDNSPresentMemory(dnsName, "TXT", keyAuth)
	if err != nil {
		return err
	}

	if err := s.DNSManager.cleanUpRecord(ctx, memory.zoneRec); err != nil {
		return err
	}
	return nil
}

// DNSManager is a type that makes libdns providers usable for performing
// DNS verification. See https://github.com/libdns/libdns
//
// Note that records may be manipulated concurrently by some clients (such as
// acmez, which CertMagic uses), meaning that multiple records may be created
// in a DNS zone simultaneously, and in some cases distinct records of the same
// type may have the same name. For example, solving ACME challenges for both example.com
// and *.example.com create a TXT record named _acme_challenge.example.com,
// but with different tokens as their values. This solver distinguishes between
// different records with the same type and name by looking at their values.
type DNSManager struct {
	// The implementation that interacts with the DNS
	// provider to set or delete records. (REQUIRED)
	DNSProvider DNSProvider

	// The TTL for the temporary challenge records.
	TTL time.Duration

	// How long to wait before starting propagation checks.
	// Default: 0 (no wait).
	PropagationDelay time.Duration

	// Maximum time to wait for temporary DNS record to appear.
	// Set to -1 to disable propagation checks.
	// Default: 2 minutes.
	PropagationTimeout time.Duration

	// Preferred DNS resolver(s) to use when doing DNS lookups.
	Resolvers []string

	// Override the domain to set the TXT record on. This is
	// to delegate the challenge to a different domain. Note
	// that the solver doesn't follow CNAME/NS record.
	OverrideDomain string

	// An optional logger.
	Logger *zap.Logger

	// Remember DNS records while challenges are active; i.e.
	// records we have presented and not yet cleaned up.
	// This lets us clean them up quickly and efficiently.
	// Keyed by domain name (specifically the ACME DNS name).
	// The map value is a slice because there can be multiple
	// concurrent challenges for different domains that have
	// the same ACME DNS name, for example: example.com and
	// *.example.com. We distinguish individual memories by
	// the value of their TXT records, which should contain
	// unique challenge tokens.
	// See https://github.com/caddyserver/caddy/issues/3474.
	records   map[string][]dnsPresentMemory
	recordsMu sync.Mutex
}

func (m *DNSManager) createRecord(ctx context.Context, dnsName, recordType, recordValue string) (zoneRecord, error) {
	logger := m.logger()

	zone, err := FindZoneByFQDN(ctx, logger, dnsName, RecursiveNameservers(m.Resolvers))
	if err != nil {
		return zoneRecord{}, fmt.Errorf("could not determine zone for domain %q: %v", dnsName, err)
	}

	rr := libdns.RR{
		Type: recordType,
		Name: libdns.RelativeName(dnsName+".", zone),
		Data: recordValue,
		TTL:  m.TTL,
	}

	logger.Debug("creating DNS record",
		zap.String("dns_name", dnsName),
		zap.String("zone", zone),
		zap.String("record_name", rr.Name),
		zap.String("record_type", rr.Type),
		zap.String("record_data", rr.Data),
		zap.Duration("record_ttl", rr.TTL))

	results, err := m.DNSProvider.AppendRecords(ctx, zone, []libdns.Record{rr})
	if err != nil {
		return zoneRecord{}, fmt.Errorf("adding temporary record for zone %q: %w", zone, err)
	}
	if len(results) != 1 {
		return zoneRecord{}, fmt.Errorf("expected one record, got %d: %v", len(results), results)
	}

	return zoneRecord{zone, results[0].RR()}, nil
}

// wait blocks until the TXT record created in Present() appears in
// authoritative lookups, i.e. until it has propagated, or until
// timeout, whichever is first.
func (m *DNSManager) wait(ctx context.Context, zrec zoneRecord) error {
	logger := m.logger()

	// if configured to, pause before doing propagation checks
	// (even if they are disabled, the wait might be desirable on its own)
	if m.PropagationDelay > 0 {
		select {
		case <-time.After(m.PropagationDelay):
		case <-ctx.Done():
			return ctx.Err()
		}
	}

	// skip propagation checks if configured to do so
	if m.PropagationTimeout == -1 {
		return nil
	}

	// timings
	timeout := m.PropagationTimeout
	if timeout == 0 {
		timeout = defaultDNSPropagationTimeout
	}
	const interval = 2 * time.Second

	// how we'll do the checks
	checkAuthoritativeServers := len(m.Resolvers) == 0
	resolvers := RecursiveNameservers(m.Resolvers)

	recType := dns.TypeTXT
	if zrec.record.RR().Type == "CNAME" {
		recType = dns.TypeCNAME
	}

	absName := libdns.AbsoluteName(zrec.record.Name, zrec.zone)

	var err error
	start := time.Now()
	for time.Since(start) < timeout {
		select {
		case <-time.After(interval):
		case <-ctx.Done():
			return ctx.Err()
		}

		logger.Debug("checking DNS propagation",
			zap.String("fqdn", absName),
			zap.String("record_type", zrec.record.Type),
			zap.String("expected_data", zrec.record.Data),
			zap.Strings("resolvers", resolvers))

		var ready bool
		ready, err = checkDNSPropagation(ctx, logger, absName, recType, zrec.record.Data, checkAuthoritativeServers, resolvers)
		if err != nil {
			return fmt.Errorf("checking DNS propagation of %q (relative=%s zone=%s resolvers=%v): %w", absName, zrec.record.Name, zrec.zone, resolvers, err)
		}
		if ready {
			return nil
		}
	}

	return fmt.Errorf("timed out waiting for record to fully propagate; verify DNS provider configuration is correct - last error: %v", err)
}

type zoneRecord struct {
	zone   string
	record libdns.RR
}

// CleanUp deletes the DNS TXT record created in Present().
//
// We ignore the context because cleanup is often/likely performed after
// a context cancellation, and properly-implemented DNS providers should
// honor cancellation, which would result in cleanup being aborted.
// Cleanup must always occur.
func (m *DNSManager) cleanUpRecord(_ context.Context, zrec zoneRecord) error {
	logger := m.logger()

	// clean up the record - use a different context though, since
	// one common reason cleanup is performed is because a context
	// was canceled, and if so, any HTTP requests by this provider
	// should fail if the provider is properly implemented
	// (see issue #200)
	timeout := m.PropagationTimeout
	if timeout <= 0 {
		timeout = defaultDNSPropagationTimeout
	}
	ctx, cancel := context.WithTimeout(context.Background(), timeout)
	defer cancel()

	logger.Debug("deleting DNS record",
		zap.String("zone", zrec.zone),
		zap.String("record_name", zrec.record.Name),
		zap.String("record_type", zrec.record.Type),
		zap.String("record_data", zrec.record.Data))

	_, err := m.DNSProvider.DeleteRecords(ctx, zrec.zone, []libdns.Record{zrec.record})
	if err != nil {
		return fmt.Errorf("deleting temporary record for name %q in zone %q: %w", zrec.zone, zrec.record, err)
	}
	return nil
}

func (m *DNSManager) logger() *zap.Logger {
	logger := m.Logger
	if logger == nil {
		logger = zap.NewNop()
	}
	return logger.Named("dns_manager")
}

const defaultDNSPropagationTimeout = 2 * time.Minute

// dnsPresentMemory associates a created DNS record with its zone
// (since libdns Records are zone-relative and do not include zone).
type dnsPresentMemory struct {
	dnsName string
	zoneRec zoneRecord
}

func (s *DNSManager) saveDNSPresentMemory(mem dnsPresentMemory) {
	s.recordsMu.Lock()
	if s.records == nil {
		s.records = make(map[string][]dnsPresentMemory)
	}
	s.records[mem.dnsName] = append(s.records[mem.dnsName], mem)
	s.recordsMu.Unlock()
}

func (s *DNSManager) getDNSPresentMemory(dnsName, recType, value string) (dnsPresentMemory, error) {
	s.recordsMu.Lock()
	defer s.recordsMu.Unlock()

	var memory dnsPresentMemory
	var found bool
	for _, mem := range s.records[dnsName] {
		if mem.zoneRec.record.Type == recType && mem.zoneRec.record.Data == value {
			memory = mem
			found = true
			break
		}
	}
	if !found {
		return dnsPresentMemory{}, fmt.Errorf("no memory of presenting a DNS record for %q (usually OK if presenting also failed)", dnsName)
	}

	return memory, nil
}

func (s *DNSManager) deleteDNSPresentMemory(dnsName, keyAuth string) {
	s.recordsMu.Lock()
	defer s.recordsMu.Unlock()

	for i, mem := range s.records[dnsName] {
		if mem.zoneRec.record.Data == keyAuth {
			s.records[dnsName] = append(s.records[dnsName][:i], s.records[dnsName][i+1:]...)
			return
		}
	}
}

// DNSProvider defines the set of operations required for
// ACME challenges or other sorts of domain verification.
// A DNS provider must be able to append and delete records
// in order to solve ACME challenges. Find one you can use
// at https://github.com/libdns. If your provider isn't
// implemented yet, feel free to contribute!
type DNSProvider interface {
	libdns.RecordAppender
	libdns.RecordDeleter
}

// distributedSolver allows the ACME HTTP-01 and TLS-ALPN challenges
// to be solved by an instance other than the one which initiated it.
// This is useful behind load balancers or in other cluster/fleet
// configurations. The only requirement is that the instance which
// initiates the challenge shares the same storage and locker with
// the others in the cluster. The storage backing the certificate
// cache in distributedSolver.config is crucial.
//
// Obviously, the instance which completes the challenge must be
// serving on the HTTPChallengePort for the HTTP-01 challenge or the
// TLSALPNChallengePort for the TLS-ALPN-01 challenge (or have all
// the packets port-forwarded) to receive and handle the request. The
// server which receives the challenge must handle it by checking to
// see if the challenge token exists in storage, and if so, decode it
// and use it to serve up the correct response. HTTPChallengeHandler
// in this package as well as the GetCertificate method implemented
// by a Config support and even require this behavior.
//
// In short: the only two requirements for cluster operation are
// sharing sync and storage, and using the facilities provided by
// this package for solving the challenges.
type distributedSolver struct {
	// The storage backing the distributed solver. It must be
	// the same storage configuration as what is solving the
	// challenge in order to be effective.
	storage Storage

	// The storage key prefix, associated with the issuer
	// that is solving the challenge.
	storageKeyIssuerPrefix string

	// Since the distributedSolver is only a
	// wrapper over an actual solver, place
	// the actual solver here.
	solver acmez.Solver
}

// Present invokes the underlying solver's Present method
// and also stores domain, token, and keyAuth to the storage
// backing the certificate cache of dhs.acmeIssuer.
func (dhs distributedSolver) Present(ctx context.Context, chal acme.Challenge) error {
	infoBytes, err := json.Marshal(chal)
	if err != nil {
		return err
	}

	err = dhs.storage.Store(ctx, dhs.challengeTokensKey(challengeKey(chal)), infoBytes)
	if err != nil {
		return err
	}

	err = dhs.solver.Present(ctx, chal)
	if err != nil {
		return fmt.Errorf("presenting with embedded solver: %v", err)
	}
	return nil
}

// Wait wraps the underlying solver's Wait() method, if any. Implements acmez.Waiter.
func (dhs distributedSolver) Wait(ctx context.Context, challenge acme.Challenge) error {
	if waiter, ok := dhs.solver.(acmez.Waiter); ok {
		return waiter.Wait(ctx, challenge)
	}
	return nil
}

// CleanUp invokes the underlying solver's CleanUp method
// and also cleans up any assets saved to storage.
func (dhs distributedSolver) CleanUp(ctx context.Context, chal acme.Challenge) error {
	err := dhs.storage.Delete(ctx, dhs.challengeTokensKey(challengeKey(chal)))
	if err != nil {
		return err
	}
	err = dhs.solver.CleanUp(ctx, chal)
	if err != nil {
		return fmt.Errorf("cleaning up embedded provider: %v", err)
	}
	return nil
}

// challengeTokensPrefix returns the key prefix for challenge info.
func (dhs distributedSolver) challengeTokensPrefix() string {
	return path.Join(dhs.storageKeyIssuerPrefix, "challenge_tokens")
}

// challengeTokensKey returns the key to use to store and access
// challenge info for domain.
func (dhs distributedSolver) challengeTokensKey(domain string) string {
	return path.Join(dhs.challengeTokensPrefix(), StorageKeys.Safe(domain)+".json")
}

// solverInfo associates a listener with the
// number of challenges currently using it.
type solverInfo struct {
	closed   int32 // accessed atomically
	count    int
	listener net.Listener
	done     chan struct{} // used to signal when our own solver server is done
}

// getSolverInfo gets a valid solverInfo struct for address.
func getSolverInfo(address string) *solverInfo {
	si, ok := solvers[address]
	if !ok {
		si = &solverInfo{done: make(chan struct{})}
		solvers[address] = si
	}
	return si
}

// robustTryListen calls net.Listen for a TCP socket at addr.
// This function may return both a nil listener and a nil error!
// If it was able to bind the socket, it returns the listener
// and no error. If it wasn't able to bind the socket because
// the socket is already in use, then it returns a nil listener
// and nil error. If it had any other error, it returns the
// error. The intended error handling logic for this function
// is to proceed if the returned listener is not nil; otherwise
// return err (which may also be nil). In other words, this
// function ignores errors if the socket is already in use,
// which is useful for our challenge servers, where we assume
// that whatever is already listening can solve the challenges.
func robustTryListen(addr string) (net.Listener, error) {
	var listenErr error
	for i := 0; i < 2; i++ {
		// doesn't hurt to sleep briefly before the second
		// attempt in case the OS has timing issues
		if i > 0 {
			time.Sleep(100 * time.Millisecond)
		}

		// if we can bind the socket right away, great!
		var ln net.Listener
		ln, listenErr = net.Listen("tcp", addr)
		if listenErr == nil {
			return ln, nil
		}

		// if it failed just because the socket is already in use, we
		// have no choice but to assume that whatever is using the socket
		// can answer the challenge already, so we ignore the error
		connectErr := dialTCPSocket(addr)
		if connectErr == nil {
			return nil, nil
		}

		// Hmm, we couldn't connect to the socket, so something else must
		// be wrong, right? wrong!! Apparently if a port is bound by another
		// listener with a specific host, i.e. 'x:1234', we cannot bind to
		// ':1234' -- it is considered a conflict, but 'y:1234' is not.
		// I guess we need to assume the conflicting listener is properly
		// configured and continue. But we should tell the user to specify
		// the correct ListenHost to avoid conflict or at least so we can
		// know that the user is intentional about that port and hopefully
		// has an ACME solver on it.
		//
		// History:
		// https://caddy.community/t/caddy-retry-error/7317
		// https://caddy.community/t/v2-upgrade-to-caddy2-failing-with-errors/7423
		// https://github.com/caddyserver/certmagic/issues/250
		if strings.Contains(listenErr.Error(), "address already in use") ||
			strings.Contains(listenErr.Error(), "one usage of each socket address") {
			log.Printf("[WARNING] %v - be sure to set the ACMEIssuer.ListenHost field; assuming conflicting listener is correctly configured and continuing", listenErr)
			return nil, nil
		}
	}
	return nil, fmt.Errorf("could not start listener for challenge server at %s: %v", addr, listenErr)
}

// dialTCPSocket connects to a TCP address just for the sake of
// seeing if it is open. It returns a nil error if a TCP connection
// can successfully be made to addr within a short timeout.
func dialTCPSocket(addr string) error {
	conn, err := net.DialTimeout("tcp", addr, 250*time.Millisecond)
	if err == nil {
		conn.Close()
	}
	return err
}

// GetACMEChallenge returns an active ACME challenge for the given identifier,
// or false if no active challenge for that identifier is known.
func GetACMEChallenge(identifier string) (Challenge, bool) {
	// Strip brackets from IPv6 addresses (e.g. "[::1]" from HTTP Host headers).
	identifier = hostOnly(identifier)
	activeChallengesMu.Lock()
	chalData, ok := activeChallenges[identifier]
	activeChallengesMu.Unlock()
	return chalData, ok
}

// The active challenge solvers, keyed by listener address,
// and protected by a mutex. Note that the creation of
// solver listeners and the incrementing of their counts
// are atomic operations guarded by this mutex.
var (
	solvers   = make(map[string]*solverInfo)
	solversMu sync.Mutex
)

// activeChallenges holds information about all known, currently-active
// ACME challenges, keyed by identifier. CertMagic guarantees that
// challenges for the same identifier do not overlap, by its locking
// mechanisms; thus if a challenge comes in for a certain identifier,
// we can be confident that if this process initiated the challenge,
// the correct information to solve it is in this map. (It may have
// alternatively been initiated by another instance in a cluster, in
// which case the distributed solver will take care of that.)
var (
	activeChallenges   = make(map[string]Challenge)
	activeChallengesMu sync.Mutex
)

// Challenge is an ACME challenge, but optionally paired with
// data that can make it easier or more efficient to solve.
type Challenge struct {
	acme.Challenge
	data any
}

// challengeKey returns the map key for a given challenge; it is the identifier
// unless it is an IP address using the TLS-ALPN challenge.
func challengeKey(chal acme.Challenge) string {
	if chal.Type == acme.ChallengeTypeTLSALPN01 && chal.Identifier.Type == "ip" {
		reversed, err := dns.ReverseAddr(chal.Identifier.Value)
		if err == nil {
			return reversed[:len(reversed)-1] // strip off '.'
		}
	}
	return chal.Identifier.Value
}

// solverWrapper should be used to wrap all challenge solvers so that
// we can add the challenge info to memory; this makes challenges globally
// solvable by a single HTTP or TLS server even if multiple servers with
// different configurations/scopes need to get certificates.
type solverWrapper struct{ acmez.Solver }

func (sw solverWrapper) Present(ctx context.Context, chal acme.Challenge) error {
	activeChallengesMu.Lock()
	activeChallenges[challengeKey(chal)] = Challenge{Challenge: chal}
	activeChallengesMu.Unlock()
	return sw.Solver.Present(ctx, chal)
}

func (sw solverWrapper) Wait(ctx context.Context, chal acme.Challenge) error {
	if waiter, ok := sw.Solver.(acmez.Waiter); ok {
		return waiter.Wait(ctx, chal)
	}
	return nil
}

func (sw solverWrapper) CleanUp(ctx context.Context, chal acme.Challenge) error {
	activeChallengesMu.Lock()
	delete(activeChallenges, challengeKey(chal))
	activeChallengesMu.Unlock()
	return sw.Solver.CleanUp(ctx, chal)
}

// Interface guards
var (
	_ acmez.Solver = (*solverWrapper)(nil)
	_ acmez.Waiter = (*solverWrapper)(nil)
	_ acmez.Waiter = (*distributedSolver)(nil)
)